Wiper Arm Linkage - Installation

INSTALLATION





1. Inspect the grommet (1) that the wiper motor sits in. If cracked, brittle, or damaged, replace the grommet (1).





2. While positioning the wiper module in its mounting location, make sure that the dowel on the bottom of the wiper motor (1) slides into the mounting grommet (2) correctly.





3. Install the two retaining bolts (1 and 4). Torque bolts to 8 Nm (70 in. lbs.).





4. Connect the wiper motor electrical connector (1).





5. Install the cowl panel (1) Cowl Panel Cover - Installation.





6. Install the wiper arms (1) and (2) Wiper Arm - Installation. Torque nuts to 18 Nm (150 in. lbs.).
7. Connect the battery negative cable.