Ladder Frame - Installation

INSTALLATION






NOTE:
When using RTV, the sealing surfaces must be clean and free from grease and oil.

NOTE:
When using RTV, parts should be assembled in 10 minutes and tighten to final torque within 45 minutes.

1. Apply a 2 mm bead of Mopar(R) engine sealant RTV or equivalent as shown.





2. Install bolts and tighten as shown following a two step method.

- First: All to 10 Nm (89 in. lbs.).

- Second: All to 26 Nm (19 ft. lbs.).

3. Install balance shaft module Engine Oil Pump - Installation.

4. Install oil pan Engine Oil Pan - Installation.