U1415

U1415-IMPLAUSIBLE/MISSING VEHICLE CONFIGURATION DATA

For a complete wiring diagram, refer to the Wiring Information Electrical Diagrams.

- When Monitored:
With the ignition on. The Occupant Restraint Controller (ORC) on board diagnostics loads the ORC Configuration Data from the Totally Integrated Power Module (TIPM) CAN Bus message.

- Set Condition:
This DTC will set if the CAN Bus message was received but the TIPM information is invalid or corrupt.





OCCUPANT RESTRAINT CONTROLLER
1. Turn the ignition on.
2. With the scan tool, read TIPM DTC.

Does the scan tool display any TIPM DTC?

Yes

- Select appropriate diagnostic procedure and repair all TIPM active DTC and before diagnosing the ORC DTC. Testing and Inspection.

No

- Replace the Totally Integrated Power Module (TIPM).
- Perform the BODY VERIFICATION TEST. Body Verification Test.