Component Tests and General Diagnostics

SPEAKER WALK-AROUND TEST

NOTE: To enter the speaker walk-around test or ACM self-diagnostic mode, the ACM must be on and in radio tuner (AM/FM) mode.

1. To enter the speaker walk-around test, simultaneously press the ACM preset buttons 3 and 6.
2. The speaker walk-around test stops at each speaker and applies sound to each speaker for about 1 to 2 seconds. Each speaker is tested and displayed on the ACM in the following sequence:
- Except THX(R): RF, LF, LR, RR, SUBWOOFER.
- THX(R): CSA FRONT, TWEETER LF, TWEETER RF, CENTER REAR, SPEAKER LF, SPEAKER RF, SPEAKER LR, SUBWOOFER, SPEAKER RR.

3. To exit the speaker walk-around test, turn the key to OFF, turn the ACM off, press preset button 1 for diagnostics (ACMs without navigation), or press "End Test" (navigation ACM).