Memory Positioning Module: Service and Repair

Driver Seat Module (DSM)













Removal and Installation

NOTICE: Electronic modules are sensitive to static electrical charges. If exposed to these charges, damage may result.

NOTE: Prior to the removal of the module, it is necessary to upload the module configuration information to a scan tool. This information must be downloaded into the new Driver Seat Module (DSM) after installation.

1. NOTE: This step is necessary only if the DSM is being replaced.

Upload the module configuration information from the DSM.

2. Remove the driver seat.

3. Remove the 2 DSM screws.

4. Disconnect the electrical connectors and remove the DSM.

5. NOTE: When a new DSM is installed, it is necessary to download the module configuration information from the scan tool into the new DSM.

To install, reverse the removal procedure.