Windshield Washer Pump: Service and Repair

Washer Pump





Removal and Installation

1. With the vehicle in NEUTRAL, position it on a hoist.

2. Disconnect the windshield washer pump electrical connector.





3. WARNING: Carefully read cautionary information on product label. For EMERGENCY MEDICAL INFORMATION seek medical advice. For additional information, consult the product Material Safety Data Sheet (MSDS) if available. Failure to follow these instructions may result in serious personal injury.

NOTE: To prevent spilling windshield washer fluid, drain the windshield washer reservoir before washer pump removal.

Disconnect the windshield washer reservoir hoses.

4. NOTE: When servicing the windshield washer pump, be careful not to damage the windshield washer pump seal.

Remove the windshield washer pump.

5. NOTICE: Do not operate the windshield washer pump before filling the windshield washer reservoir. Failure to do so could result in premature pump failure.

To install, reverse the removal procedure.

- Fill the windshield washer reservoir with windshield washer fluid.