Radio/Stereo: Service and Repair

Satellite Digital Audio Receiver System (SDARS) Module









Removal and Installation

1. NOTE: Module configuration is required when a new Satellite Digital Audio Receiver System (SDARS) module is being installed.

Upload the SDARS module configuration information to the scan tool. For additional information, refer to Programmable Module Installation (PMI) in Information Bus. Programming and Relearning

2. Remove the engine cover.

3. Disconnect the SDARS module antenna cable and electrical connectors.

4. Remove the 2 bolts, and the SDARS module.

5. To install, reverse the removal procedure.
- Download the configuration information to the SDARS module. For additional information, refer to PMI in Information Bus. Programming and Relearning