Antenna: Service and Repair

Antenna









Removal and Installation

NOTE: This procedure applies to both the AM/FM antenna and the combination AM/FM/satellite radio antenna.

1. Remove the LH and RH D-pillar trim panels.

2. Remove the rear dome lamp.

3. Carefully lower the rear of the headliner to gain access to the antenna.

4. Loosen the antenna cable bolt and disconnect the cable from the antenna.
- To install, tighten to 8 Nm (71 lb-in).

5. Remove the antenna.
- Remove the antenna mast, if equipped.

- Press the 2 tabs and remove the antenna.

6. To install, reverse the removal procedure.