Radio/Stereo: Service and Repair

Satellite Digital Audio Receiver System (SDARS) Module









Removal and Installation

1. NOTE: Module configuration is required when a new Satellite Digital Audio Receiver System (SDARS) module is being installed.

Upload the SDARS module configuration information to the scan tool. For additional information, refer to Programmable Module Installation (PMI) in Module Configuration Programmable Module Installation (PMI).

2. Remove the engine cover. For additional information, refer to Interior Trim and Ornamentation Service and Repair.

3. Disconnect the SDARS module antenna cable and electrical connectors.

4. Remove the 2 bolts, and the SDARS module.

5. To install, reverse the removal procedure.
- Download the configuration information to the SDARS module. For additional information, refer to PMI in Module Configuration Programmable Module Installation (PMI).