Antenna: Service and Repair

Antenna









Removal and Installation

1. Remove the LH and RH D-pillar trim panels. For additional information, refer to Interior Trim and Ornamentation D-Pillar Trim Panel.

2. Remove the rear dome lamp. For additional information, refer to Interior Lamp in Interior Lighting Service and Repair.

3. Carefully lower the rear of the headliner to gain access to the antenna.

4. Remove the antenna cable bolt and retaining clip from the antenna.
- To install, tighten to 8 Nm (71 lb-in).

5. Disconnect the antenna cable connectors.

6. Remove the antenna.
- Remove the antenna mast, if equipped.

- Press the 2 tabs and remove the antenna.

7. To install, reverse the removal procedure.