Operation CHARM: Car repair manuals for everyone.

Washer Pump




Washer Pump





Removal and Installation

1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Jacking and Lifting Service and Repair.

2. Remove the RH front fender splash shield. For additional information, refer to Front End Body Panels Fender Splash Shield.

3. WARNING: Carefully read cautionary information on product label. For EMERGENCY MEDICAL INFORMATION seek medical advice. In the USA or Canada on Ford/Motorcraft products call: 1-800-959-3673. For additional information, consult the product Material Safety Data Sheet (MSDS) if available. Failure to follow these instructions may result in serious personal injury.

NOTE: When installing a new washer pump, be careful not to damage the rubber grommet.

NOTE: To prevent spilling washer fluid, drain the washer reservoir before washer pump removal.

Remove the washer pump.

- Disconnect the washer pump electrical connector.

- Disconnect the washer hoses.

- Remove the windshield washer pump.

4. NOTICE: Do not operate the washer pump prior to filling the washer reservoir. Failure to follow this instruction may result in premature pump failure.

To install, reverse the removal procedure.

- Fill the washer reservoir with windshield washer fluid.