Radiator Grille Opening Panel Reinforcement

Radiator Grille Opening Panel Reinforcement









Removal and Installation

1. Remove the front bumper cover. For additional information, refer to Bumpers Service and Repair.

2. Remove the headlamps. For additional information, refer to Exterior Lighting Service and Repair.

3. Remove the hood latch assembly. For additional information, refer to Handles, Locks, Latches and Entry Systems Service and Repair.

4. Remove the LH and RH radiator side air deflector screws and remove the radiator air deflectors.

5. Remove the fender-to-radiator grille opening panel reinforcement bolts.
- To install, tighten to 25 Nm (18 lb-ft).

6. Remove the radiator grille opening panel reinforcement upper bolts.
- To install, tighten to 25 Nm (18 lb-ft).

7. Remove the radiator grille opening panel reinforcement.

8. To install, reverse the removal procedure.