Headliner: Service and Repair

Headliner

Removal and Installation









Front and rear headliner

NOTE: All pushpin are one time use only.

1. Remove the front overhead console. For additional information, refer to Instrument Panel and Console Console - Overhead.

2. Remove the A-pillar trim panel. For additional information, refer to A-Pillar Trim Panel A-Pillar Trim Panel.

3. Remove the front headliner pushpin.
- Remove the 6 rear positioned pushpin.

- Remove the 2 side positioned pushpin.

4. Remove the front headliner by sliding the headliner forward and down.

Rear headliner

5. Remove the LH and RH garment hook screws and the garment hooks.

6. Remove the middle and rear dome lamps.
- Pull the dome lamp housing straight down.

- Disconnect the electrical connectors.

7. Remove the rear headliner pushpin.

8. Remove the headliner.

Front and rear headliner

9. To install, reverse the removal procedure.
- Install new pushpins.