Fan Shroud: Service and Repair

Cooling Fan Motor and Shroud









Removal and Installation

1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Jacking and Lifting Service and Repair.

2. Disconnect the cooling fan motor and shroud resistor electrical connector.

3. Disconnect the RH and LH cooling fan motor electrical connector.
- Detach the LH cooling fan motor wiring harness pin-type retainer.

4. Remove the 2 nuts and the cooling fan motor and shroud.
- To install, tighten to 5 Nm (44 lb-in).

5. To install, reverse the removal procedure.