Wiper Pivot Arm - Rear

Wiper Pivot Arm - Rear

Removal and Installation

1. Pull the lower portion wiper pivot arm nut cover upward to access the wiper pivot arm nut.

2. NOTE: For proper installation, identify the washer jet nozzle position before removing the washer jet nozzle.

Remove the washer jet nozzle.

- Pull the washer jet nozzle away from the wiper motor.

3. NOTICE: Failure to remove the washer jet nozzle before installing the removal puller, will damage the washer jet nozzle.

NOTE: After the wiper pivot arm nut is removed, a suitable 2 jaw puller may be necessary to remove the wiper pivot arm.

Remove the nut and the wiper pivot arm.

- To install, position the wiper blade vertically and tighten to 15 Nm (133 lb-in).

4. To install, reverse the removal procedure.