JA6 - Check CKP+ Bias Fault - CKP Sensor Disconnected - KOEO

- Key Off.

- Disconnect CKP sensor from vehicle harness connector.

- DVOM on 40 volt DC scale.

- Key On, Engine Off.

- Measure voltage between (+)J35 (CKP+ I) and (-)J7 (B-) at breakout box.

- Is DC voltage greater than 1.0 volt but less than 2.0 volts?

YES -- Go to JA7. JA7 - Check CKP- Bias Fault - CKP Sensor Disconnected - KOEO

NO -- Bias fault. Go to JA19. JA19 - Check For Bias Voltage High or Bias Voltage Low Fault