Test F: The Speed Control Is Inoperative - Flash With Last Switch Pressed, But No Dynamic Pull Occurs At The Throttle
PINPOINT TEST F: THE SPEED CONTROL IS INOPERATIVE - FLASH WITH LAST SWITCH PRESSED, BUT NO DYNAMIC PULL OCCURS AT THE THROTTLEF1-F2:
Normal Operation
Immediately (0.25 second) after the static test has passed, the speed control actuator will carry out a dynamic test automatically by actuating the throttle lever from 1 to 10 mm (0.04 to 0.39 inches) of travel from the idle position.
Possible Causes
- Speed control cable
- Speed control actuator