Test D: The Wash And Wipe Function Is Inoperative

PINPOINT TEST D: THE WASH AND WIPE FUNCTION IS INOPERATIVE

D1-D3:

D3-D4:

Normal Operation
When the wash function is selected, the wiper/washer switch provides a ground signal to the generic electronic module (GEM) through circuit 32-KA6 (WH/BK). The GEM cycles the windshield wiper motor for a programmed amount of cycles before allowing the wiper system to return to the mode selected by the operator.

Possible Causes
- circuit 32-KA6 (WH/BK) open or short to ground
- GEM