Test C: One Low Beam Headlamp Is Inoperative - Halogen Headlamps
PINPOINT TEST C: ONE LOW BEAM HEADLAMP IS INOPERATIVE - HALOGEN HEADLAMPSNormal Operation
When the smart junction box (SJB) receives a request for the low beams, the SJB provides voltage to circuits 1338 (WH) and 1336 (LG/WH), through the bussed electrical center (BEC), to the LH and RH low beams, respectively. Ground for the low beams is provided through circuit 1205 (BK), which is routed through the BEC.
- DTC B2501 (LF Lamp Low Beam Circuit Failure) - is a continuous and on-demand DTC that sets when the SJB detects an open or short to ground from the LH headlamp voltage supply circuit.
- DTC B2503 (RF Lamp Low Beam Circuit Failure) - is a continuous and on-demand DTC that sets when the SJB detects an open or short to ground from the RH headlamp voltage supply circuit.
This pinpoint test is intended to diagnose the following:
- Wiring, terminals or connectors
- BEC
- SJB
C1-C2:
C3-C5:
C5-C7:
C7-C9:
C9-C10:
