Test G: The Flash-To-Pass Feature Is Inoperative

PINPOINT TEST G: THE FLASH-TO-PASS FEATURE IS INOPERATIVE

Normal Operation
The smart junction box (SJB) sends a voltage reference signal to the multifunction switch through circuit 1395 (RD/PK). When the flash-to-pass feature is activated, the multifunction switch routes the signal back to the SJB. The SJB then provides voltage to the high beams.

Vehicles equipped with high intensity discharge (HID) headlamps utilize a shutter within the headlamp assembly to increase the beam pattern. When the flash-to-pass feature is activated, the SJB activates the low beams and the shutters momentarily (less than 0.5 second).

This pinpoint test is intended to diagnose the following:
- Wiring, terminals or connectors
- Multifunction switch
- SJB

G1-G3:

G4: