Test K: The Turn Signal Lamps Are Always On
PINPOINT TEST K: THE TURN SIGNAL LAMPS ARE ALWAYS ONNormal Operation
The smart junction box (SJB) sends a voltage reference signal to the multifunction switch through circuit 1393 (LB/RD) (LH turn signal) and circuit 1392 (LG/OG) (RH turn signal). When the multifunction switch is placed in the LH or RH TURN position, the signal is routed through circuit 1396 (VT/WH) to an internal ground within the SJB.
- DTC B2281 (Right Turn Switch Short to Ground) - is an on-demand DTC that sets when the SJB detects a short to ground from the RH turn signal input circuit.
- DTC B2282 (Left Turn Switch Short to Ground) - is an on-demand DTC that sets when the SJB detects a short to ground from the LH turn signal input circuit.
This pinpoint test is intended to diagnose the following:
- Wiring, terminals or connectors
- Multifunction switch
- SJB
K1-K3:
