Test M: The Hazard Lamps Are Inoperative/Always On

PINPOINT TEST M: THE HAZARD LAMPS ARE INOPERATIVE/ALWAYS ON

Normal Operation
The smart junction box (SJB) sends a voltage reference signal to the hazard flasher switch through circuit 1689 (RD/WH). When the hazard flasher switch is pressed, the signal is routed to ground through circuit 1205 (BK).

- DTC B2071 (Hazard Switch Signal Short to Ground) - is an on-demand DTC that sets when the SJB detects a short to ground from the hazard flasher lamp switch input circuit.

This pinpoint test is intended to diagnose the following:
- Wiring, terminals or connectors
- Hazard flasher switch
- SJB

M1-M4:

M4-M6:

M6-M7: