Fluid Pan: Service and Repair

4F27E

Transmission Fluid Pan





Transmission Fluid Pan









Removal

1. With the vehicle in NEUTRAL, position it on a hoist.

2. NOTE: The transmission fluid pan is filled with transmission fluid and cannot be drained before removing.

Remove the transmission fluid pan.

- Remove the bolts.

- Using a suitable tool, separate the bead of sealer.





3. Clean the silicone from the transmission fluid pan and transaxle case surfaces thoroughly with metal surface prep.

Installation

1. NOTE: Do not use more than the specified amount of sealer on the pan or internal transaxle damage could occur.

Apply a bead 1.5 mm (0.059 in) thick of sealer to the transmission fluid pan.





2. Install the transmission fluid pan.
- Tighten to 10 Nm (89 lb-in).





3. Lower the vehicle.

4. Fill the transaxle with clean transmission fluid.