Fan Shroud: Service and Repair

Cooling Fan Motor and Shroud

Removal and Installation

1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Jacking and Lifting Service and Repair.

2. Remove the lower radiator air deflector. For additional information, refer to Front End Body Panels Service and Repair.

3. Disconnect the cooling fan motor and shroud electrical connector and the pin-type retainers.

4. Remove the 2 bolts and remove the cooling fan motor and shroud from the vehicle.
- To install, tighten to 5 Nm (44 lb-in).

5. To install, reverse the removal procedure.