Radiator Cooling Fan Motor: Service and Repair

Cooling Fan Motor and Shroud - 3.7L and 5.0L

















Removal and Installation

1. Remove the air cleaner and the air cleaner outlet tube. For additional information, refer to Intake Air Distribution and Filtering Diagrams.

2. Release the tabs and remove the air cleaner inlet pipe.

3. Remove the 2 bolts and position the degas bottle aside.
- To install, tighten to 8 Nm (71 lb-in).

4. Disconnect the cooling fan motor and shroud electrical connector.

5. If equipped, remove the transmission cooler tubes bracket bolt.
- To install, tighten to 8 Nm (71 lb-in).

6. Remove the bolt, the stud bolt and the cooling fan motor and shroud.
- To install, tighten to 8 Nm (71 lb-in).

7. To install, reverse the removal procedure.