Connector Location Index

PLEASE NOTE:
If a link on the index chart to a figure is not provided, that means that the connector and/or figure in question does NOT apply to the vehicle model selected.

The abbreviation T/O (Take Out) is used in the location column to indicate a point in which the wiring harness branches out to a component.

The abbreviation N/S means Not Shown in the illustrations.

A/C Auxiliary Fan - Blower Motor Resistor Block:

Blower Motor Resistor Block C1 - C215:

C216 - Cylinder Lock Switch-Driver:

D(+) Relay No.1(Relay Block) - Engine Control Module C1 (Except OBD):

Engine Control Module C1(OBD) - Fuses(Fuse Block No.2):

Fuses(Fuse Block No.3) - Interior Lamp No.4:

Interior Lamp No.5 - Metering Pump:

Microphone Connector - SKREEM Transponder:

Speaker-Left Front Door Assembly C1 - Turn Signal/Anti-theft Alarm Relay - Right (Relay Box):

Warm Air Auxiliary Heater Assembly C1 - Wiper/Turn Signal/Engine Start: