Audible Warning Device Control Module: Service and Repair

Remove or Disconnect
1. Negative (-) battery cable.
2. One nut and left-side kick panel.
3. One bolt retaining junction block 1.
4. Position junction block 1 to gain access to audio alarm module (attached to back of junction block 1).
5. Electrical connector from audio alarm module.
6. Audio alarm module from junction block 1.

Install or Connect
1. Audio alarm module to junction block 1.
2. Electrical connector to audio alarm module.
3. Reposition junction block 1; secure with one bolt.

Tighten
^ Junction block 1 bolt to 10 N.m (89 lb.in.).

4. Left-side kick panel; secure with one nut.
5. Negative (-) battery cable.