DTC 4

Self-diagnosis LED indicator blinks four times:

Most likely an electrical problem in the TDC/Crank/Cyl Sensor system.

Part 1 Of 2:

Part 2 Of 2:

The CRANK sensor determines timing for fuel injection and ignition of each cylinder and also detects engine RPM. The TDC sensor determines ignition timing at start-up (cranking) and when crank angle signal is abnormal.

The Check Engine warning light and ECU LED may come on, indicating a system problem, when, in fact, there is a poor or intermittent electrical connection. First, check the electrical connections, clean or repair connections if necessary.