P1410

DTC P1410: Air Pump Malfunction

1. Reset the ECM.
2. Make sure the engine coolant temperature is over 32 °F (0 °C) and below 158 °F (60 °C) with the scan tool.
3. Start the engine. While the air pump operates, let the engine idle with no load (in neutral) for at least 10 seconds.
4. Check for a Temporary DTC with the scan tool.

Is Temporary DTC P1410 indicated?

YES - Replace the air pump.

NO - Intermittent failure, system is OK at this time. Check for poor connections or loose terminals at the air pump and the air pump relay.