B2983
DTC B2983 or DTC indicator B and AUTO: A problem in the Recirculation Control Linkage, Door, or Motor1. Clear the DTC with the HDS.
2. Turn the ignition switch OFF, and then ON (II).
3. Do the self-diagnostic with the HDS or climate control unit.
4. Check the DTCs.
Is DTC B2983 or B and AUTO indicated?
YES - Go to step 5.
NO - Intermittent failure.
5. Turn the ignition switch OFF.
6. Disconnect the recirculation control motor 7P connector.
7. Disconnect climate control unit connector A (32P).
8. Check for continuity between the given terminals of climate control unit connector A (32P) and the recirculation control motor 7P connector.
Is there continuity?
YES - Go to step 9.
NO - Repair open in the wire(s) between the climate control unit and the recirculation control motor.
9. Check for continuity between body ground and climate control unit connector A (32P) terminals No. 15 and 16 individually.
Is there continuity?
YES - Repair short to body ground in the wire(s) between the climate control unit and the recirculation control motor.
NO - Go to step 10.
10. Test the recirculation control motor.
Is the recirculation control motor OK?
YES - Substitute a known-good climate control unit, and recheck. If the symptom/indication goes away, replace the original climate control unit.
NO - Replace the recirculation control motor, or repair the recirculation control linkage or door.