DTC Ex-11

DTC Ex-11 ("x" can be 0 thru 9 or A thru F): Control Operation Recorded

NOTE: Before doing this troubleshooting procedure, review SRS Precautions and Procedures and General Troubleshooting Information.

1. Clear the DTC memory.
2. Turn the ignition switch to ON (II), then wait for 10 seconds.
3. Read the DTC.

Is DTC Ex-11 and Fx-11 indicated?

YES - The SRS unit must be replaced after any airbags and/or tensioners have deployed.

NO - Go to step 4.

4. Clear the DTC memory.
5. Turn the ignition switch to ON (II), then wait for 10 seconds.
6. Read the DTC.

Is DTC Ex-11 indicated?

YES - Faulty SRS unit; replace the SRS unit.

NO - Intermittent failure, the system is OK at this time. Go to Troubleshooting Intermittent Failures. Troubleshooting Intermittent Failures If another DTC is indicated, troubleshoot the DTC.