DTC 14-22

DTC 12-22: Right-front Wheel Speed Sensor Installation Error (19 mph (30 km/h) or more)

DTC 14-22: Left-front Wheel Speed Sensor Installation Error (19 mph (30 km/h) or more)

DTC 16-22: Right-rear Wheel Speed Sensor Installation Error (19 mph (30 km/h) or more)

DTC 18-22: Left-rear Wheel Speed Sensor Installation Error (19 mph (30 km/h) or more)

1. Test-drive the vehicle. Drive the vehicle between 19 mph (30 km/h) and 31 mph (50 km/h) for 70 seconds or more.

NOTE: Drive the vehicle on the road, not on the hoist.

2. Check the RF, LF, RR, LR WHEEL SPD in the ABS DATA LIST with the HDS.

Are all four the same indicated value?

YES - Intermittent failure, the system is OK at this time. Check for loose terminals between the wheel speed sensor 2P connector and the ABS modulator control unit 25P connector. Refer to intermittent failures troubleshooting.

NO - Go to step 3.

3. Turn the ignition switch OFF.
4. Check that the appropriate wheel speed sensor is properly mounted.





Is the wheel speed sensor installation OK?

YES - Replace the appropriate wheel speed sensor.

NO - Reinstall the wheel speed sensor properly.