DTC 83

DTC 83: No VSP Signal

NOTE: If DTC 85 is also set, troubleshoot DTC 85 first.

1. Turn the ignition switch ON (II).
2. Clear the DTC with the HDS.
3. Test-drive the vehicle at 7 mph (10 km/h) or more.
4. Check the speedometer.

Does the speedometer register speed?

YES - Go to step 5.

NO - Substitute a known-good ECM/PCM, and reset. If no codes are shown, replace the original ECM/PCM.

5. Check the VEHICLE SPEED in the TPMS DATA LIST with the HDS.

Is the vehicle speed indicated?

YES - The system is OK at this time.

NO - Substitute a known-good TPMS control unit, and recheck.