Front Seat Frame Replacement - Drivers Seat

Front Seat Frame Replacement - Driver's Seat

Special Tools Required
- KTC trim tool set SOJATP2014*

Driver's Seat

Check the operation of the driver's seat position sensor after any of these actions: Drivers Seat Position Sensor Operation Check

- Driver's seat position sensor replacement

- Cover plate (front side of driver's seat slide rail) replacement

NOTE:

- Put on gloves to protect your hands.

- Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.

- If the side airbag has deployed, replace the seat frame and related parts with new ones. Service and Repair

1. Remove the front seat.

2. Remove these items:
- Front seat-back cover/pad:
- 2-door

- 4-door Front Seat-Back Cover Replacement (4-Door)

- Front seat cushion cover/pad:
- 2-door

- 4-door Front Seat Cushion Cover Replacement (4-Door)

- Seat belt buckle Front Seat Belt Replacement (4-Door)

- Seat position sensor Service and Repair

- Side airbag Side Airbag Replacement

3. Detach the clips, then remove the height outer cover (2-door)/the upper rail outer cover (A) (4-door).

10-way power seat





Manual height adjustable seat





4. Detach the clip, then remove height inner cover (2-door)/the upper rail inner cover (A) (4-door).

10-way power seat





Manual height adjustable seat





5. Remove the recline inner cover (A) and the center inner cover (B) from the seat frame (C).

10-way power seat





Manual height adjustable seat





6. 10-way power seat: Remove the rear gear outer cover (A) and the rear gear inner cover (B).

7. Install the new seat frame in the reverse order of removal, and note these items:
- If the clips are damaged or stress-whitened, replace them with new ones.

- Push the clips into place securely.