Washer Motor Test

Washer Motor Test

1. Remove the right inner fender. Front Inner Fender Replacement

2. Disconnect the 2P connector (A) from the washer motor (B).

3. Test the motor by connecting battery power to the terminal No. 2 and ground to the terminal No. 1 of the washer motor. The motor should run.
- If the motor does not run or fails to run smoothly, replace it.

- If the motor runs smoothly, but little or no washer fluid is pumped, check for a disconnected or blocked washer hose, or a clogged washer motor outlet.

4-door USA models





All 2-door models and 4-door Canada models