Rear Seat Removal/Installation

Rear Seat Removal/Installation

NOTE: Take care not to scratch the body or tear the seat covers.

1. Remove the bolt between the seat-back (A) and the seat cushion (B).






2. Pull each front edge of the seat cushion (A) up to release the hooks (B), then pull back the seat cushion, and remove it.

3. Remove all of the head restraints.






4. Release the center seat belt (A) from the center belt guide (B).






5. Remove the bolts (A, B) securing the seat-back (C).






6. Lift the seat-back (A) up to release the wire loops with collars (B) from the hooks (C) on the body, then remove the seat-back.

7. Install the seat in the reverse order of removal, and note these items:
- Guide the belts over the front of the seat-back as you install it.

- Before attaching the rear seat-back and cushion, make sure there are no twists or kinks in the seat belts.

- When installing the seat cushion, slip the seat belt buckles through the slits in the seat cushion.