A/T Gear Position Indicator Panel Light Harness/Park Pin Switch Replacement (A/T)

A/T Gear Position Indicator Panel Light Harness/Park Pin Switch Replacement

NOTE: The A/T gear position indicator light and the park pin switch are not available separately. Replace the A/T gear position indicator light and the park pin switch as a set.

1. Remove the shift lever assembly. A/T Shift Lever Removal (A/T)

2. Loosen the A/T gear position indicator panel. Overhaul

3. Remove the park pin switch (A) while pressing the park pin switch lock (B).






4. Remove the A/T gear position indicator panel light bulb (A) and the socket (B) from the indicator panel (C), and remove the light bulb from the socket.

5. Remove the harness clamp (D), and remove the park pin switch/A/T gear position indicator panel light connector (E) from the shift lever assembly/bracket base (F).

6. Install a new park pin switch (G) on the shift lever.

7. Install the A/T gear position indicator panel light bulb in the new socket, and install it in the indicator panel.

8. Clamp the harnesses together with the harness clamp, then install the harness clamp on the shift lever bracket base.

9. Route the harnesses along the harness guides, and install the new connector in the bracket base.

10. Install the A/T gear position indicator panel. Overhaul

11. Install the shift lever assembly. A/T Shift Lever Installation (A/T)

12. Install the center console. Center Console Removal/Installation