Radiator Cooling Fan: Service and Repair

Fan, Fan Motor, and Shroud Removal and Installation

Removal

1. Remove the coolant reservoir.






2. Disconnect the radiator fan motor connector (A), then remove the harness clamp (B).

3. With A/C: Disconnect the condenser fan motor connector (C) and the A/C compressor clutch connector (D), then remove the harness clamps (E).






4. Remove the radiator upper brackets.






5. With A/C: Remove the condenser fan shroud assembly (A) and the radiator fan shroud assembly (B) from the radiator, then remove the condenser fan shroud assembly from the vehicle.

6. Remove the radiator fan shroud assembly from right side of the engine compartment.






7. Disassemble the fan shrouds.






Installation

1. Assemble the fan shrouds.






2. Install the radiator fan shroud assembly (A).

3. With A/C: Install the condenser fan shroud assembly (B).






4. Install the radiator upper brackets.






5. Connect the radiator fan motor connector (A), then install the harness clamp (B).

6. With A/C: Connect the condenser fan motor connector (C) and the A/C compressor clutch connector (D), then install the harness clamps (E).






7. Install the coolant reservoir.