Paddle Shifter - (Downshift Switch) Replacement (A/T)

Paddle Shifter - (Downshift Switch) Replacement

SRS components are located in this area. Review the SRS component locations Locations and the precautions and procedures Technician Safety Information before doing repairs or service.

1. Remove the steering wheel. Steering Wheel Removal

2. Remove the four screws (A) securing the steering wheel rear cover (B), then remove the steering wheel rear cover.






3. Remove the paddle shifter - (downshift switch) connector (A) from its holder, and disconnect the connector.

4. Remove the screws (B) securing the paddle shifter - (C), and remove the paddle shifter -.

5. Install a new paddle shifter - on the steering wheel, and secure it with the screws.

6. Connect the paddle shifter - connector securely, and install the connector in the connector holder.

7. Install the steering wheel rear cover, and secure the rear cover with the four screws.

8. Install the steering wheel. Steering Wheel Installation