Drivers Dashboard Lower Cover Removal/Installation

Driver's Dashboard Lower Cover Removal/Installation

Special Tools Required

- KTC trim tool set SOJATP2014*

'06-09 Models

NOTE:

- Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.

- Take care not to scratch the dashboard or related parts.

1. Remove the driver's dashboard lower cover (A).
-1 Turn the lock knob (B) 90 °.
Gently pull out on the bottom edge to release the clips (C, D).

2. Install the cover in the reverse order of removal, and note these items:
- If the clips are damaged or stress-whitened, replace them with new ones.

- Push the clips into place securely.