Front Seat Frame Replacement - Passenger's Seat (2-Door)

Front Seat Frame Replacement - Passenger's Seat

Special Tools Required

- KTC Trim Tool Set SOJATP2014
*

2-door

SRS components are located in this area. Review the SRS component locations SRS Component Location Index (2-Door) and the precautions and procedures Service and Repair before doing repairs or service.

Do the front passenger's weight sensor initialization Programming and Relearning after front passenger's seat frame replacement.

NOTE:

- If the side airbag has deployed, replace the seat frame and related parts with new ones Service and Repair.
- Put on gloves to protect your hands.
- Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.

1. Remove the front seat Front Seat Removal/Installation.

2. Remove these items:

- Front seat-back cover/pad Front Seat-back Cover Replacement (2-Door)
- Front seat cushion cover/pad Front Seat Cushion Cover Replacement (2-Door)
- Seat belt buckle Front Seat Belt Replacement (2-Door)
- ODS unit ODS Unit Replacement
- Side airbag Side Airbag Replacement

3. Slide the front seat frame rearward fully.

4. While releasing the tabs (A), disengage the hooks (B) from the rear outer seat weight sensor cover (C), then remove the front outer seat weight sensor cover (D).






5. Release the tabs (A), then remove the front inner seat weight sensor cover (B).






6. Slide the front seat frame forward fully, detach the clips, then remove the rear outer seat weight sensor cover (A) and the rear inner seat weight sensor cover (B) from the back of both seat tracks.










7. Remove the recline inner cover (A) and the center inner cover (B) from the seat frame (C).





8. Install the seat frame in the reverse order of removal, and note these items:

- If the clips are damaged, replace them with new ones.
- Push the clips and the hooks into place securely.