Side Defogger Vent Trim Removal/Installation

Side Defogger Vent Trim Removal/Installation

Special Tools Required

- KTC Trim Tool Set SOJATP2014
*

NOTE:

- Take care not to scratch the dashboard or the related parts.
- Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.

1. Remove the side defogger vent trim (A).

1. Insert the appropriate trim tool into a gap between the trim and the driver's outer middle pad (B), and detach the clips (C).

2. Pull out the trim to detach the clip (D).





2. Install the trim in the reverse order of removal, and note these items:

- If the clips are damaged or stress-whitened, replace them with new ones.
- Push the clips into place securely.