Heater Control Panel Removal/Installation

Heater Control Panel Removal/Installation

1. Remove the center panel Audio Unit Removal/Installation (Without Navigation).

2. Remove the control cables from the blower/heater unit Adjustments.

3. Pull out the right portion of the instrument panel Instrument Panel Removal/Installation.

4. Remove the screw, and pull out the heater control panel (A) to access the electrical connectors.





5. Disconnect the connectors, and remove the heater control panel along with the control cables.

6. Install the control panel in the reverse order of removal. After installation, operate the controls to make sure they work properly.