Fuel Pressure Regulator: Service and Repair

Fuel Pressure Regulator Replacement

1. Remove the fuel tank unit Fuel Tank Unit Removal/Installation.

2. Remove the reservoir (A).





3. Remove the clip (B) and the ground wire (C), then remove the bracket (D).

4. Remove the clip (E), then remove the fuel pressure regulator (F).

5. Install the parts in the reverse order of removal with new O-rings (G) and a new bracket. When installing the fuel tank unit, align the marks on the unit and the fuel tank Fuel Tank Unit Removal/Installation.

NOTE:

- Coat the O-rings with clean engine oil; do not use any other oils or fluids.
- Do not pinch the O-rings during installation.
- Use all the new parts supplied in the pressure regulator replacement kit.