Power Mirror Replacement

Power Mirror Replacement

NOTE: Take care not to scratch the door.

1. Lower the door glass fully.

2. With your hand, carefully pull out the top edge of the tweeter cover (A) to release the upper hooks (B) and detach the clip. Remove the cover by lifting it upward to release the bottom hooks (C). Disconnect the tweeter connector (D).






3. Disconnect the power mirror connector (A).





4. While holding the power mirror, remove the nuts securing the mirror.

5. While holding the power mirror (A), squeeze the retaining tabs on the connector clip (B), then push out to remove the power mirror.





6. Install the mirror in the reverse order of removal, and note these items:

- Make sure each connector is plugged in properly.
- If the clip is damaged or stress-whitened, replace it with a new one.
- Make sure the power mirror operate properly.
- Push the clip and the hooks on the cover into place securely.