Power Mirrors (Front Passengers Power Window Switch) Input Test

Power Mirrors (Front Passenger's Power Window Switch) Input Test

1. Turn the ignition switch to LOCK (0), open and close the driver's door, then remove the front passenger's (passenger's) power window switch.

- 4-door Front Passenger's Power Window Switch Replacement (4-Door)
- 2-door Front Passenger's Power Window Switch Replacement (2-Door)

2. Disconnect the 37P connector (A) from the front passenger's (passenger's) power window switch (B).

NOTE: The illustration shows 4-door model.





3. Inspect the connector and socket terminals to be sure they are all making good contact.

- If the terminals are bent, loose, or corroded, repair them as necessary, and recheck the system.
- If the terminals look OK, go to step 4.

4. Reconnect the connector to the front passenger's power window switch, turn the ignition switch to ON (II), and do the following input tests:

- If any test indicates a problem, find and correct the cause, then recheck the system.
- If all the input tests prove OK, go to step 5.





5. Turn the ignition switch to LOCK (0), open and close the driver's door, then disconnect the 37P connector from the front passenger's power window switch again.

6. With the connector still disconnected, do the following input tests:

- If any test indicates a problem, find and correct the cause, then recheck the system.
- If all the input tests prove OK, replace the front passenger's power window switch, and go to step 7.
- 4-door Front Passenger's Power Window Switch Replacement (4-Door)
- 2-door Front Passenger's Power Window Switch Replacement (2-Door)

NOTE:

- If equipped with front passenger's power window AUTO UP/AUTO DOWN function, after replacing the front passenger's power window switch, reset the power window control unit Testing and Inspection.
- When testing for defogger function, holding a cup of hot water near the mirror glass will form steam that can assist in diagnosing a broken or under-performing defogger.









7. With the front passenger's power window AUTO UP/AUTO DOWN function, reset the power window control unit Testing and Inspection.