Seat Frame Replacement

Seat Frame Replacement

Special Tools Required

- KTC Trim Tool Set SOJATP2014
*Available through the Honda Tool and Equipment Program, 888-424-6857

SRS components are located in this area. Review the SRS component locations and the precautions and procedures before doing repairs or service.

Driver's Seat

Check the operation of the driver's seat position sensor after any of these actions Driver's Seat Position Sensor Operation Check:

- Driver's seat position sensor replacement
- Cover plate (front side of driver's seat slide rail) replacement

NOTE

- Put on gloves to protect your hands.
- Apply oil to the pivot portions of the slide locks.
- Apply multipurpose grease to the sliding portions of the seat tracks.
- If the side airbag has deployed, replace the seat frame and related parts with new ones Service and Repair.
- Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.
- Take care not to tear or damage the seat covers.

1. Remove the seat Seat Removal/Installation.

2. Remove these items:

- Recline covers Seat Recline Cover Removal/Installation
- Seat belt buckle
- Seat-back cover/pad Seat-Back Cover Replacement
- Seat cushion cover/pad Seat Cushion Cover Replacement
- Side airbag module Side Airbag Replacement
- Driver's seat position sensor Service and Repair





3. Detach the clip, then remove the upper rail inner cover (A) and the upper rail outer cover (B).

Upper rail inner cover





Upper rail outer cover





4. Install the new seat frame in the reverse order of removal, and note these items:

- If the clips are damaged or stress-whitened, replace them with new ones.
- Push the clip into place securely.

Passenger's Seat

Do the front passenger's weight sensor initialization after passenger's seat frame replacement.

NOTE

- Put on gloves to protect your hands.
- Apply oil to the pivot portions of the slide locks.
- Apply multipurpose grease to the sliding portions of the seat tracks.
- If the side airbag has deployed, replace the seat frame and related parts with new ones Service and Repair.

1. Remove the seat Seat Removal/Installation.

2. Remove these items:

- Recline covers Seat Recline Cover Removal/Installation
- Seat belt buckle
- Seat-back cover/pad Seat-Back Cover Replacement
- Seat cushion cover/pad Seat Cushion Cover Replacement
- Side airbag module Side Airbag Replacement
- ODS unit ODS Unit Replacement





3. Detach the clips, then remove the upper rail inner cover (A) and the upper rail outer cover (B).

Upper rail inner cover





Upper rail outer cover





4. Install the new seat frame in the reverse order of removal, and note these items:

- If the clips are damaged or stress-whitened, replace them with new ones.
- Push the clip into place securely.