Power Mirror Actuator Test

Power Mirror Actuator Test

1. Remove the door panel:

- Driver's door panel Front Door Panel Removal / Installation
- Front passenger's door panel Front Door Panel Removal / Installation

2. Disconnect the 6P (or 13P)* connector (A) from the power mirror actuator (B).

*: With Driving Position Memory System (DPMS)






3. Check the actuator operation by connecting battery power and ground according to the table.





4. If the mirror fails to work properly, check for an open or high resistance in the wire between the connector and the mirror holder. If the wire is OK, replace the mirror actuator.

Defogger Test

5. Check for continuity between terminals No. 2(or No. 1)* and No. 1(or No. 2)* of the 6P(or 13P)* connector. There should be continuity.

*: With DPMS

6. If there is no continuity, check for an open or high resistance in the wire between the connector and the mirror holder. If the wire is OK, replace the mirror holder Mirror Holder Replacement.