Engine Undercover Replacement

Engine Undercover Replacement

NOTE:

- Put on gloves to protect your hands.
- Take care not to scratch the body.
- When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage.

1. Remove the engine undercover (A).

1. Detach the clip (B) that secures the engine undercover to the body.

2. Detach the clips (C) that secure the front inner fenders (D) and the engine undercover to the body.

3. From under the front bumper (E), detach the clips (F) that secure the front bumper, the front inner fender, and the engine undercover to the body.

4. From under the front bumper, detach the clips (G) that secure the front bumper and the engine undercover to the body.

5. From under the body, detach the clips (H) that secure the engine undercover to the front subframe.

6. Release the hooks (I) of the engine undercover, then pull out the engine undercover.

NOTE: To release the clips, pry up on the center pin at the notch (J).





2. Install the undercover in the reverse order of removal, and note these items:

- If the clips are damaged or stress-whitened, replace them with new ones.
- Push the clips and the hooks into place securely.