Air Bag Deactivation Indicator: Service and Repair

Passenger's Airbag Cutoff Indicator Replacement

1. Do the battery terminal disconnection procedure Procedures, then wait at least 3 minutes before starting work.

2. With navigation: Remove the dashboard center vent.

3. Without navigation: Remove the audio switch panel Audio Unit Removal/Installation (Without Navigation).

4. Disconnect the hazard warning switch/passenger's airbag cutoff indicator 6P connector (A) on the audio wire harness.

With navigation





Without navigation





5. Push out the hazard warning switch/passenger's airbag cutoff indicator (B) from behind the dashboard center vent (C) or audio switch panel (D).

6. Reinstall the parts in the reverse order of removal.

7. Do the battery terminal reconnection procedure Procedures.

8. Clear any DTCs with the HDS.

9. Confirm proper SRS operation: Turn the ignition switch to ON (II), and check that the SRS indicator comes on for about 6 seconds and then goes off.